top of page

The CMP 11 pyranometer from Kipp & Zonen uses the same temperature compensated detector technology originally developed for the CMP 22 and offers a step up in performance from the CMP 6. The reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications and is particularly suitable for meteorological networks.


A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug.


The integral bubble level is raised to the top of the housing allowing it to be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector has gold-plated contacts allowing for easy exchange and re-calibration. The screw-in drying cartridge is also easy to remove and the replacement desiccant is supplied in convenient refill packets.


The Pyranometer does not require any power, it supplies a low voltage of 0-20 mV in relation to the amount of incoming radiation. When a higher voltage level or a 4-20 mA signal is required, the AMPBOX is the perfect solution.


Product Specification:


Spectral range  285 to 2800 nm

Sensitivity  7 to 14 µV/W/m²

Response time  < 5 s

Zero offset A  < 7 W/m²

Zero offset B  < 2 W/m²

Directional error (up to 80 ° with 1000 W/m² beam)  < 10 W/m²

Temperature dependence of sensitivity (-10 ºC to +40 ºC)  < 1 %

Operating temperature range  -40 °C to +80 °C

Maximum solar irradiance  4000 W/m²

Field of view  180 °

copy of Pyranometer - CMP11 KIPP & ZONEN

  • 4- 6Weeks From Date Of order Confirmation

bottom of page